|
This 3.5gm Brushless motor was developed specifically for Micro models that weigh within 45gms. There are basically 3 different winding options, optimized for both single cell and 2 cell Lipo operation:
Mighty Midget 10/3/32T - This is the motor for 2 cell Lipo operation. With a max current draw of slightly under 1amp, a 2S pack of the FR/AW 130's or similar cells is a perfect match. The GWS 4*2.5, and 3*2 props are a good match with this motor. More details below ( Measurements at 7.0V ):
Mighty Midget 10/3/26S- This wind is optimized for single cell operation, and makes for an ideal replacement for motors in the KP00 class. A single FR/AW 130 cell is ideal for this motor. Most suited props are the GWS 5*3 and the GWS 4*2.5. More details below ( Measurements at 3.5V ):
Measurements at 7.0V
Mighty Midget 10/3/26D- This wind is again optimized for single cell operation, but is best for smaller props like the U-80, GWS 3*2 and 4*2.5. Since the max current draw for this wind is around 2amps, larger cells, like the E-tec 250’s or the Wes 310mah lipo must be used. More details below ( Measurements at 3.5V ):
Seen here with a GWS 0425 prop
|
